Topic: How to reset the board
Hi every body,
after assembling my scale and installing the electronic part, I could get access to the admin panell (192.168.4.1).
I configured it and made an update. After the scale has rebootet every thing looked fine and so I removed the jumper from the config mode.
Next day I had to recognise, that there must be a failure in my config. The scale didn't connect to my router and couldn't find the monitor server.
So I tried to get again into the config mode. But my neiter my Ipad nor my notebook could get access to the scale.
It looks like if they connect to the internal wifi, but they couldn't open the admin page.
My idea is, to reset the panel. I saw, that the jumper has on the other side of the config-mode a "flash mode".
Is this the option the reset the board? And could I connect after a rest to the admin panell (192.168.4.1)?
Thank you for your help