Topic: First batch build progress

Hello,

Here are some news about our progress, as of friday 6/4/18

What do we do ourselves? from who are we supplying? Where we are?



Mechanical part
  • All the complex plate parts are laser cut, we subcontract that from a local company. We already got a run for a single kit, to test the parts, especially last minute improvements, and tolerances, no big issue encountered. 100 batch is planned for next friday (13rd)

  • Screws/nuts/spacers are supplied locally, ordered today. We buy in bulk, so we'll have to prepare kits (count and put in bag)

  • Aluminium tube and profilés, already cut all the parts. Next big job is to drill... we do that ourself.
    We already built a prototype of the tooling. Today be build the definitive one in a more stable material. Next week, drilling...

  • All other supplies like motor, belt, pulley, shaft support etc.... comes from China, we received everything.


Electronic part
  • Mainboard PCB design is finalized. Found a subcontractor in France to make the PCB and assemble the SMDs. Ordered.
    Components are already delivered.
    PCB delivery planned week of 16th. We'll have to solder trough holes connectors, and flash the MCU.

  • Daughter boards / shields : Testing the different options, including GSM and Lora in addition of Sigfox. For components supply and planning issues, we'll assemble that ourselves.
    Sigfox modules, GSM modules, Lora modules (for proto), antennas, are ordered. Still to order PCB (quite fast). Assembly planned for week 16th

  • Case : we already received the case. We have to drill them, and build a part for sealing the cables going out. It's likely to be a 3D printed part and some acrylic or silicone paste to seal. We'll deliver a small amount in syringe, to avoid you to build a 300ml cartridge, and throw away of let dry 295ml.


Packaging

Box and bag for screws are ordered, will be there soon (next monday likely).


Assembly manual
  • Already made something nice in the past, but we have to complete it with last modifications. It'll look like the video on the
    website, black wire of white background (Ikea manual inspired ;-) ). I think it's the most readable when printed on paper.

  • We'd like, it time allows, ask some friends, normally handy, who doesn't know the project, to assemble it, and we observe him without helping, to see what would make assembly confusing. We already worked hard to make the easiest possible, by reducing the amount of different parts, to avoid parts looking like the same, but not the same, by marking a reference on laser cuts etc...
    But there is a big bias.... We know our project like our pocket. We need a virgin brain ;-)

  • We'd like also, in addition, film ourself mounting completely one scale, from packaging opening, to electronic configuration.
    Might help to see how we mount it the easiest way. Because sometimes, it looks easy on paper, but it happens the last screw are pretty inaccessible.

  • List the the necessary tools, to be done.


Pictures soon...

Re: First batch build progress

https://s31.postimg.cc/ym80uks3b/livraison_alu.jpg

https://s31.postimg.cc/oc5lvcx2v/d_coupe.jpg

https://s31.postimg.cc/925qo745j/d_coupe_laser.jpg

https://s31.postimg.cc/aih96cmhz/electronique.jpg

https://s31.postimg.cc/yky31jnt3/m_canique_assembl_e.jpg

Re: First batch build progress

The mainboard, and the 3 daughter boards prototypes : sigfox, lora, gsm...

https://s31.postimg.cc/8hi11a547/IMG_20180407_010644.jpg

Re: First batch build progress

https://s17.postimg.cc/u2zlhri97/Cartes_ma_tres_Wifi_et_esclaves_Sigfox_Gsm_et_Lora.jpg

Re: First batch build progress

https://s17.postimg.cc/ccxwwuezv/r_ception_d_coupe_laser_19_avril_2018.jpg

https://s17.postimg.cc/k6yihwmp7/per_age_des_profil_s_entre_deux_greffages_de_reines.jpg

https://s17.postimg.cc/ma8xpw763/Greffage.jpg

Re: First batch build progress

Electronic case decoration...

https://s14.postimg.cc/v4r2jt8ul/IMG_20180425_234201.jpg

https://s14.postimg.cc/i0li74w8d/IMG_20180425_234305.jpg

Re: First batch build progress

The mainboard, and the 3 daughter boards:  : sigfox, lora, gsm...
https://s17.postimg.cc/566xcytxn/carte_ma_tre_et_esclaves.jpg


aluminum protective cover
https://s17.postimg.cc/x6b0x7n3f/20180427_112505.jpg


assembly manual
https://s17.postimg.cc/e17rnhy5n/manuel.jpg


local parcel preparation
https://s17.postimg.cc/pqbrbhzez/local_pr_paration_colis.jpg


starting the assembly video tutorial
https://s17.postimg.cc/4j80n924r/tuto_video_montage.jpg
and finished...


https://s17.postimg.cc/5y9lc0dij/fin_du_montage_tuto_video.jpg

Re: First batch build progress

configuration interface of the electronic board

https://s7.postimg.cc/p61l1i5w7/interface_Wifi_de_configuration_des_cartes.png

Re: First batch build progress

Thanks for being so open about the process! Interesting to see all the work that lies behind the finished product.

Re: First batch build progress

Hi,
this is incredible!
How do I order one please?

Re: First batch build progress

Hello and thank you!
Please send an email to contact@openhivescale.org with details : which connectivity, where you live (for shipping cost), and we'll reply with a bank account number for transfer.

Pierre

12 (edited by beep 2019-01-03 13:34:03)

Re: First batch build progress

Wow, I am pretty amazed how you came up with this brilliant idea, how precise it is and how energy efficient! Well done!!
The only downside to your design is that it seems pretty complex and that the 'fragility' concerns me a bit... We are also building our Beep scale, based on 'creeping' sensors' :-) Let's evaluate both designs in a while. We would be interested to work together, just as we do with the German open source initiative Hiveeyes.

Regards and keep up the good work!

Re: First batch build progress

Thanks for your feedback!
I know it looks pretty complex, even though we spent nights and nights to discuss how the reduce the number of parts/bolts.
Fragility is less an issue. We had the idea to run a crash test by weighing under a wheel of 2t van and see if it breaks, and what breaks. But it's likely it won't.
The risk is more about grass that could grow under, or small animal/insects interacting, and make the measurement wrong.
Again, we would also be happy to collaborate across projects, share good ideas, make system interoperable, etc..